If your Swiffer Wetjet isn’t spraying, you’re probably wondering what to do. This can be a frustrating problem to deal with, but don’t worry – we have some solutions for you! In this blog post, we will discuss the causes of a Swiffer Wetjet not spraying and provide some tips on how to fix the issue. We will also answer some frequently asked questions about Swiffer Wetjets. Keep reading for more information!
Swiffer Wetjet: A Modern Mop
The Swiffer Wetjet is a battery-operated floor mop. It has a detachable reservoir that can be filled with water and cleaning solution. The Wetjet also comes with a disposable cleaning pad.
The Swiffer Wetjet is designed for quick and easy cleaning of hard floors. It is safe for use on all types of hard floors, including laminate, tile, and wood.
What is Better: Traditional Mop or a Swiffer Wetjet?
Mops are traditional cleaning tools that have been used for centuries. Swiffer Wetjets are a newer invention, and they offer several advantages over mops.
Swiffer Wetjets are much easier to use than mops. There is no need to wring out a wet mop, and you don’t have to worry about dirty water getting on your floors.
Swiffer Wetjets also do a better job of cleaning than mops. The disposable pads absorb dirt and grime, and the built-in scrubbing brush helps loosen stubborn dirt and stains.
Most Common Reasons Why Swiffer Wetjet isn’t Sspraying and How to fix it
There are several reasons why your Swiffer Wetjet might not be spraying. The most common reason is that the reservoir is not filled with enough water.
- Incorrect installation of the cleaning solution bottle.
The Swiffer Wetjet comes with a detachable reservoir that can be filled with water and cleaning solution. If the reservoir is empty, or if there is not enough water in it, the pump will not be able to spray any solution. Make sure that the reservoir is filled to the fill line with clean water. If the reservoir is not properly attached, the pump will not be able to spray any solution.
Make sure that the reservoir is securely attached to the base of the unit. The locking tab should be in the locked position.
- Check if the batteries are low.
If your Wetjet is not spraying, the first thing you should check is the batteries. The Wetjet requires four AA batteries (not included). If the batteries are low or dead, they will need to be replaced.
- Check and Clean the clogged nozzle.
Another common reason why the Wetjet is not spraying is because the nozzle is clogged. The nozzle can become clogged with dirt and grime, and this will prevent the solution from being sprayed. To clean the nozzle, remove it from the base of the Wetjet and rinse it under warm water.
- The pump is clogged.
Another possible reason why your Swiffer Wetjet isn’t spraying is that the pump may be clogged. If this happens, you’ll need to clean the pump by following these steps:
– Unplug the Swiffer Wetjet from the power outlet.
– Remove the battery cover and take out the batteries.
– unscrew the pump assembly from the bottom of the Swiffer Wetjet.
– Rinse the pump assembly with clean water.
– Allow the pump assembly to air dry completely before reassembling the Swiffer Wetjet.
- The pump needs replacing.
If your Swiffer Wetjet still isn’t spraying after following these steps, you may need to replace the pump assembly. The pumps are not covered by Swiffer’s warranty, but they are available for purchase on Swiffer’s website. You also can purchase a replacement pump assembly from a local retailer.
FAQs about my Swiffer Wetjet is not spraying
- How often change Swiffer WetJet pads?
Swiffer recommends that you change the pads on your WetJet every two to three months, or when they become excessively dirty.
- How often should I clean my Swiffer WetJet?
You should clean your Swiffer WetJet after each use. Be sure to empty the reservoir and rinse out the nozzle after each use. To clean the pump assembly, follow the instructions in the previous section. 
- Can I use my Swiffer WetJet on carpet?
No, the Swiffer WetJet is not designed for use on carpet. The built-in scrubbing brush can damage carpet fibers. If you need to clean a carpeted area, Swiffer makes a separate product called the Swiffer SweeperVac.
- Should I use a lubricant if Swiffer WetJet is not spraing?
No, do not use any type of lubricant on the Swiffer WetJet. Doing so will damage the pump assembly and void the warranty.
Final Remarks
I hope this article was helpful in troubleshooting your Swiffer Wetjet! If you have any other questions, please feel free to leave a comment below and I’ll be happy to help. Thanks for reading!
