The majority of the mud and dirt that spoiled your pool party originated from heavy rains districts bringing dust, grime, and other materials which only dirty your pool further. Wind also causes the leaves of nearby trees to drop into your pool, clogging the system and making it difficult to clean.
In this article we’re going to dicsuss how to clean your pool without a vacuum.
- Check The Water Filter Pump
- Use a Skimmer Net
- Sepetrel Swimming Pool Leaf Skimmer Net,Reinforced Frame Deep Rake Net
- Disinfecting the Water with Chlorine
- Adding Chlorine in the Water
- HTH Pool Care Chlorine Granules Ultra,
- Cleaning the Bottom of the Pool
- Swimming Pool Brush for Cleaning Pool Walls,Tiles & Floors,
- How to Prevent Pool Contamination?
- Video: A couple ways to get dirt off the bottom of your pool
- Final Words
Check The Water Filter Pump
The first step in keeping your pool clean is to make sure that your water filter pump filter is clean. You want to go ahead and get a water hose, you want to clean between here. Make sure you get all the dirt and bacteria that was pumped through your pool. If you have a sand filter, you can backwash it. You want to do this every couple of weeks, or at least once a month.
Make sure you have your pump running for about an hour every day just to make sure the clean water circulates to the pool. It’s cleaning as you can see, and if it’s too dirty, you can also purchase a new one too. All right, go ahead and put it back inside the water pump. That’s the first step in making sure to clean the pool without a vacuum.
Use a Skimmer Net
To clean your pool without a vacuum is that you can use a net. Some nets like
is extra for cleaning the surface of the pool water!
Go around the pool and manually collect as much floating debris as possible from the water using a skimmer. And you can do cleaning from outside the pool, as well as to go inside with some clean feet and then you’re just moving around getting all the dirt out of it. You can see some debris carried by the wind – insects, leaves, grass, twigs from trees in here. You should grab it and throw it away. When you’re walking in the pool you already loosened the dirt from the floor, so you can go with your net and get the dirt that is flowing around.
Disinfecting the Water with Chlorine
The last and most important thing is to disinfect the water in the pool with chlorine. We’ll do it in two steps.
- Adding Chlorine in the Water
- Checking The Pump to See if it is Working
Adding Chlorine in the Water
Using chlorine, you’re not only preventing allergies, but also halting the build-up of allergies. So just know that we’re living in a time where coronavirus is present and take the extra steps to clean your pool accordingly.
Firstly, we’ll add some chlorine in the water. We bought this chlorine
for quick disinfection. You can purchase the same product on Amazon or somewhere else.
You have to calculate how much chlorine you need for your size of your pool. Since we got 3800 liters, we need about, let’s say 20 to 30 grams. Then you need your kitchen scale. This floor is kind of uneven that’s why it showed two grams.
But, you cannot put this granules directly in the pool because they’re not going to dissolve. So I prepared a bowl with some fresh water to put it in there and stir it around until is dissolved. It takes about two to four minutes to mix it, and we’re about to put it in the pool right now.
Since we want to clean the pool walls as well, we will add the chlorine solution to the water only near the pool walls and let the pump do the rest. So, еhe one thing you want to remember, when you put it in the pool, you want to put it on the outer edges and walk around it. Because the solution is going to spread in the pool better.
It’s kind of complicated to clean the pool or disinfect it without a vacuum when you got kids in the pool. You also want to make sure that your pump is not on when the kids are in the pool. To cut the final step to this, we’re just going to go ahead and turn the pump on.
Make Sure The Pump is Working
The final step in cleaning your pool without a vacuum is making sure that the pump is active and it’s working. Open up the knob to let the air pressure flow through to release the air. So now you can get a better flow. I’m going to leave it open like a couple seconds. Wait till the water come out. Then you’ve done a good job when the water comes out here and close it. The water should running nice and well. That mean your pool has circulation and everything has been circulated throughout the air.
Cleaning the Bottom of the Pool
You can use different cleaning methods depending on the dirt you want to remove.
Using Thick Brush
Furthermore, you’ll need a brush to algae and debris from the pool. Although, the kind of brush you want to use is critical.
According to our specialists, if your pool is concrete then metal or stainless steel brushes like
are best for cleaning the floors. If your flooring is vinyl though, you should use a nylon-bristle brush instead.
Using Tennis Balls
Throwing tennis balls into the pool is an easy way to clean up oil stains and debris. Tennis balls absorb oil, so after they become dirty, you should replace them with fresh ones.
To use this method, you need your pool shock product like
HTH Pool Care Shock Advanced, Swimming Pool Chemical Prevents Bacteria & Algae,
one pound of calcium hypochlorite, hand gloves, a bucket of water, and your safety goggles.
- To begin, put on your gloves and goggles. Then, mix together one kilogram of the shock product with calcium hypochlorite in five or six gallons of water.
- Afterward, pour the mixture onto whatever parts of the pool are affected by algae. Afterwards, keep the pump running constantly for eight to twelve hours; our experts advise doing this at night so that the shock will have ample time to kill off all the algae.
- If after shocking the water still appears cloudy, run the pool for even longer hours than usual until it clears up again.
How to Prevent Pool Contamination?
- The best way to prevent your pool from being contaminated is by using a pool cover. A pool cover will keep leaves, dirt, and debris from entering your pool and dirtying the water. It is also important to make sure that you clean your pool regularly.
- You could also use a rake, a plastic rake to get the leaves out of there.
- You could also use a tennis racket if you don’t have a rake or a net.
- Also, you can put a plastic mat on the floor, so the kids will come out the house from there, they will walk onto the mat, and normally we’ll spread it feet down and they will get into the pool, and this will reduce the amount of dirt you’ll have in the pool.
- If you don’t have a cover for your pool, you can also use a tarp. A tarp will keep leaves and debris from entering your pool and dirtying the water. It is important to make sure that you clean your pool regularly to prevent contamination.
We hope you liked our article. It is important to keep your pool clean, especially when you got kids that go in the pool every day. Cleaning the pool without a vacuum cleaner can be a hassle, but it’s worth it in the long run. You’re reducing risk, you’re taking care of your family, and you’re taking care of the people that’s going to share the pool with you!