Roomba Brush Not Spinning: How to Fix

If your Roomba brush isn’t spinning, you’re not alone. This is a common problem that many people experience with their Roombas. Fortunately, there are a few things you can do to fix the issue. In …

If your Roomba brush isn’t spinning, you’re not alone. This is a common problem that many people experience with their Roombas. Fortunately, there are a few things you can do to fix the issue. In this blog post, we will discuss some of the most common causes of this problem and how to fix them. We will also provide some helpful tips for keeping your brush spinning properly in the future!

Roomba Robotic Vacuum Cleaner 

A Roomba is a robotic vacuum cleaner that has been designed to help clean your floors without you having to lift a finger. These nifty little devices are becoming increasingly popular, as they can save you time and effort when it comes to keeping your home clean.

One of the most common issues that people have with their Roombas is that the brush stops spinning. This can be frustrating, as it means that your Roomba is not doing its job properly. However, there are some easy ways to fix this problem.

Why My Roomba Brush Not Spinning

  • tangled brushes

If your Roomba’s brush is not spinning, the first thing you should check is the brushes themselves. Make sure that they are not tangled or obstructed in any way. If they are, simply untangle them and clear any debris that may be blocking them.

  • not properly seated brushes

Another possible reason why your Roomba’s brush might not be spinning is because the brushes are not properly seated in the brush cage. If this is the case, you can simply remove the brushes and put them back in place. Make sure that they are firmly locked into place before trying to use your Roomba again.

  • clogged up brushes

The brush module could be clogged up with dirt and debris. Cleaning it out should fix the problem.

You can’t see the dirt and debris, but there are some things so small they’re hidden from view by all those particles. That must be where your problem lies! If you clean out this section here with a swab or cloth lightly dampened in rubbing alcohol (isopropyl), then it will work as expected again.

  • an issue with motor

If you have checked all of these things and your Roomba’s side brush still isn’t spinning, there may be an issue with the motor that drives the brush. If this is the case, you will need to contact customer service for further assistance.

  • an issue with drive belt

Another reason of not spinning Roomba brushes is an issue with the drive belt. This is a relatively easy problem to fix, but it will require you to open up your Roomba. Once you have done this, locate the drive belt and make sure that it is not damaged or broken. If it is, you will need to replace it.

If your Roomba’s brush is still not spinning after following these steps, then you may need to contact customer support for further assistance. In most cases, they will be able to help you troubleshoot the problem and get your Roomba up and running again in no time. Thanks for reading! We hope this article was helpful.

FAQs 

  • How often to replace the brushes?

The side brushes should be replaced every few months and the main brush should be replaced every six months, depending on how heavily you use the robot.

  • How to clean the Roomba’s brushes?

To clean the Roomba’s brushes, simply remove them from the brush cage and use a soft bristled brush to remove any dirt or debris that may be caught in them. You can also use a vacuum cleaner with a soft bristle attachment to do this. Once they are clean, simply put them back in place and your Roomba should be good as new!

  • Can I replace Roomba’s brushes by myself?

Yes, you can replace the Roomba’s brushes by yourself. To remove the old roller brushes you need to remove the yellow release tabs from the brush guard and pull upward. Using one side of the yellow-colored bearing, lift the roller brushes up after removing them from their positions. They should move smoothly out of their locations. Finally, finish installing the new roller brushes by repeating previous steps.

Final Thoughts

In conclusion, if your Roomba’s brush is not spinning, there are a few things you can check to try and fix the problem. First, make sure that the brushes are not tangled or obstructed in any way. Second, make sure that they are properly seated in the brush cage. Finally, if all else fails, you may need to contact customer support for further assistance. Thanks for reading! We hope this article was helpful.

 

If your Roomba’s side brush is not spinning, the first thing you should check is the brushes themselves. Make sure that they are not tangled or obstructed in any way. If they are, simply untangle them and clear any debris that may be blocking them.