Many vacuum cleaners will leave wet carpeting with a wet spot because the water is not vacuumed up. This can lead to mold and mildew or even damage to your carpet. The vacuum should not be able to suck up any excess water on the carpet after it has been used. If you want to vacuum wet carpets, there are some tips for doing so!
Can you Vacuum a Wet Carpet?
Many people vacuum their carpets and vacuum cleaners come with a guard to keep the vacuum from sucking up liquids. But there is an important question: Can you vacuum wet carpet?
It’s not a good idea to use your ordinary vacuum cleaner on wet carpet. Even if it’s a Dyson, we recommend you avoid it. The biggest reason why you should avoid water is that your house vacuum’s filter cannot handle liquids.
Most home vacuum cleaners are meant to be used solely on carpets and are extremely hazardous if utilized on moist floors. Unless your household vacuum is designed for wet vacuuming, do not use it on wet carpets!
To vacuum on a wet carpet, however, you’ll need a specific vacuum cleaner that is ideal for wet carpets. As a result, you can not use a normal vacuum on the wet carpet.
Vacuum Cleaners for Wet Areas
To vacuum wet carpet, you need to have the right vacuum for your job. A regular vacuum with rotating brushes is not going to work well on a wet area. Use one of these vacuums instead:
- Upright or canister vacuum with sealed suction system
- Low moisture vacuum cleaner
- High capacity commercial extractor
Wet-dry Canister Vacuum Cleaner
A wet-dry vacuum cleaner is a vacuum cleaner that can be used to vacuum liquids as well as solids. It consists of a motor, a dustbin, and a hose. The dustbin can be removed from the vacuum so that it can be emptied easily. The hose allows the vacuum to be used on stairs and other difficult-to-reach places.
The best way to clean up liquid is by using this vacuum because “it has enough suction power to lift liquids” and also because of its design which makes it easy to maneuver around furniture and other obstacles. So if you’re looking for an efficient way to clean up your liquid messes, then look no further than the wet-dry vacuum cleaner!
How to Vacuum with a wet-dry Canister Cleaner
If there is a spill on the carpet, do not vacuum it up right away. The vacuum will only push the liquid deeper into the carpet and make the stain bigger. Instead, use a cloth or paper towels to soak up as much of the liquid as possible. Then vacuum the area where the spill was located.
- If there is a lot of liquid on the carpet, vacuum it in small sections so that you can get all of the liquid out of the carpet fibers before moving on to another section. This is more effective than trying to vacuum over large areas.
- Vacuum wet carpet in small sections at a time so that you can get all of the liquid out of the carpet fibers before moving on to another section. This is more effective than trying to vacuum over large areas.
- Once done vacuuming let it dry naturally and do not use fans near where you just vacuumed because this could blow bacteria and molds back up into some moist spots in your carpets that need dried completely but natural airflow only! Fans speed up drying process which increases risk of mold growth.
- If the vacuum cleaner has a wet vacuum setting, use it to suck up any remaining liquid on the carpet before you go over the area with your regular vacuum cleaner. This will make sure that all of the water is gone and prevent streaks from appearing after you are done cleaning. However, if this option isn’t available, don’t worry; just get as much water off of it using your hands or paper towels first and then vacuum again when finished!
Alternative ways to Clean Wet Carpet
If your vacuum cleaner has not wet vacuum settings, don’t worry; there are some ways to clean up your wet carpet.
- If there is no electricity, try using a mop or broom to push the liquid out of the carpet fibers.
Then use a towel to soak up as much of the liquid as possible. Blot the area dry with another towel.
- Use fans or dehumidifiers to speed up the drying process.
For example, try fanning the wet area with three fans, each of which is positioned in a triangle around it and all of which blows outside of the center. You may also get industrial dehumidifiers and air movers.
- If the weather is warm, open neighboring windows to allow the humidity to escape.
Final Remarks
As you can see, there are many reasons why vacuuming wet carpets might not be a good idea. If your vacuum cleaner is unable to suck up the excess water on the carpet after it has been used, then don’t use it! You’ll save yourself some time, efforts and even health by following these simple tips for how to vacuum wet carpets instead!
